Numerical Modeling of Solitons in a Low Birefringent Optical Fiber

A numerical investigation, based on the split-step Fourier transform algorithm of all optical switching of solitons in a low birefringent optical fiber is presented. The numerical algorithm is described in detail. This revised version was published online in August 2006 with corrections to the Cover Date.     

Rugged distal tips for CO2 laser medicine

Low-loss and rugged distal tips for CO₂ laser have been proposed and fabricated based on a commercially available stainless steel (St) pipe. A method of smoothening the inner surface of the St pipe with a rough inner surface is put forward. Fabrication parameters, transmission properties, and mechanical strength of the cyclic olefin polymer-coated silver hollow St distal tip are experimentally discussed.     

利用模式的对称性研究光子晶体光纤的色散

由光子晶体光纤的对称性可以得到模式分布的对称性，根据模式的对称性选择适当的展开函数，可以使计算量大大减少。计算了六角结构光子晶体光纤的色散特性，得到了波长在1．55pm处色散为零时，光子晶体光纤的结构参量所满足的方程。     

斐索梯度折射率光纤透镜传感实验

采用LD泵浦的单纵模Nd：YVO4倍频激光器、梯度折射率光纤透镜等器件构成斐索梯度折射率光纤透镜传感实验仪．本文介绍了实验装置和实验原理，并给出了实验结果。     

中空光纤技术与应用特性

介绍一种采用环烯烃聚合物镀膜的中空光纤结构，阐述其传输特性，说明其使用特点，指出它在工业和医疗等领域中的应用前景。     

基于新型长周期光纤光栅的掺铒光纤放大器

报道了基于高频CO₂激光脉冲写入的新型长周期光纤光栅的低噪音掺铒光纤放大器,这种新型长周期光纤光栅是用大约几千Hz的高频CO₂激光脉冲对光纤玻璃热冲击作用而形成的.在铒纤中插入一个长周期光纤光栅,会明显减少掺铒光纤放大器的放大自发辐射(ASE)噪音.报道了两种低噪音掺铒光纤放大器,作为前置放大器和线路放大器,它们的ASE噪音指数分别从4.0 dB减少到3.5 dB和从4.8 dB减少到4.3 dB,并且在作为线放时,其小信号增益从30 dB提高到37 dB,降噪及提高增益效应十分显著.     

Fiber-Optic Backscattering Profile Measurements for Determination of the Optical Coefficients of Turbid Media

The necessity of using anisotropic approximation in techniques for determining optical parameters from the backscattered radiation profile is shown. A fiber-optic technique for simultaneous determination of the anisotropy parameter as well as the scattering and absorption coefficients of turbid media is proposed. It is based on the comparison of the experimental backscattered radiation profiles and those obtained by the numerical Monte Carlo method.     

一种控制掺铒光纤激光器超混沌的方法——非线性延时反馈参数调制法

提出一种非线性延时反馈参数调制法来控制混沌/超混沌，给出了利用这种方法控制处于超混沌状态的双环掺铒光纤激光器的方案.数值模拟表明，只要延时时间和反馈强度合适就可以把双环掺铒光纤激光器从超混沌状态成功地控制到不同的周期状态. 关键词： 掺铒光纤激光器 超混沌 非线性延时反馈参数调制 混沌控制     

三包层WⅠ和WⅡ型单模光纤波导色散特性的研究

研究了三包层WⅠ和WⅡ型单模光纤的波导色散特性。结果发现在相同条件下，三包层WⅠ和WⅡ型单模光纤零色散点的调节范围比传统的双包层W型单模光纤明显增大。详细分析了几何参量P、Q和光学参量R1、R2对单模传输时的波导色散特性和低次模截止频率的影响。所得的研究结果为获得更为理想的色散补偿、色散平坦光纤及设计新型无源光器件提供了重要的依据。计算波导色散的方法可推广到多包层光纤。